🌐 Multilingual Notice This post is originally written in English and automatically translated into 14 languages. The content should display in your device's default language, but if it doesn't, you can select your preferred language by tapping the flag icon at the bottom right of the screen. If your language is not listed, please leave a comment below, and we’ll consider adding it! In this post, we’ll guide you through how to use the Nescafé Dolce Gusto EF1058 machine which you will use at Lingua Cottage.
When using hot water for extraction
 | Before preparing your drink, please make sure that the water tank is filled with drinking water, the power is on, and a cup is placed under the dispenser.
Also, check the recommended extraction volume for the capsule. |  | 1. Lift the locking panel. 2. Insert the capsule holder with the capsule into the machine, then lower the locking panel. |  | Set the extraction temperature to your preference.
When the temperature is being adjusted, the temperature indicator will blink. Please wait until it stays solid. |  | Touch the extraction level indicator or the XL button to set your desired amount, then press the extraction button.
As the extraction begins, the indicator will gradually decrease to show the remaining volume.
To stop the extraction midway, simply touch the extraction button again.
If the water runs out during extraction, refill the water tank with drinking water, place it back into the machine, and press the extraction button again.
When all the extraction indicators turn off and the control panel blinks and then lights up again, your drink is ready.
Do not lift the locking panel while the control panel is blinking. |  | Lift the locking panel and carefully remove the capsule holder, making sure not to touch the used capsule. Dispose of the capsule in the trash.
After use, rinse both sides of the capsule holder with tap water and place it back into the machine.
If you are making multiple mug-sized drinks in a row, please wait at least 90 seconds before starting the next extraction. |
When extracting with cold water (for iced drinks)
 | Only products labeled "Cold Water Extraction" on the top of the capsule package are suitable for extraction with cold water.
Before preparing your drink, please ensure that the water tank is filled with drinking water, the power is on, and a cup is placed under the dispenser.
Also, check the recommended extraction volume indicated on the capsule. |  | 1.
If you wish to use cold water for your first drink after turning on the machine, touch the temperature selection button within 10 seconds of powering on to switch it to “Room Temperature”.
If more than 10 seconds have passed before switching to “Room Temperature,” the indicator will blink blue.
In that case, please follow the steps outlined in the orange box below under “When the temperature indicator is blinking blue.”
2.
Refer to Steps 4 to 6 in the section “Preparing a Drink (When Using Hot Water)” to set the extraction volume and begin the extraction. |  |
When the temperature indicator is blinking blue If more than 10 seconds have passed after turning on the machine, or if you want to switch to cold water extraction after using hot water, you will need to flush out the warmed water inside the machine.
1. Place a container under the dispenser, and insert the rinsing tool into the capsule holder.
2. Set the extraction volume indicator to level 7, then press the extraction button. The warmed water inside the machine will be discharged.
3. When the temperature indicator changes from blinking to solid, the machine is ready for cold water extraction.
| FAQ link | https://nestle.jp/home/brands/dolce-gusto/user-support/genio_s/faq/ |
If you think the machine may be malfunctioning while in use, please contact a staff member immediately.
(thru LINE or Instagram DM)
|
